Glove Port

Glove Port Specification

Filter Type
HEPA Filter

Material
Stainless steel

Type
Clean Room Air Purifier

About Glove Port

Standard glove ports made of plastics (PP, Delrin, or PTFE) to accommodate a variety of glove and sleeve combinations. The inner diameter of the port is about 197 mm and outer diameter is about 240 mm. There are two slots on the port to retain gloves. On the other end, there is a threaded ring to lock the port with contact surface during installation.

Two-component assembly allows for easy removal and replacement with interchangeable parts
Standard 8.6'' (220 mm) or 10.6'' (270 mm) port
Two retaining rings create a tight seal between the glove port and the smooth surfaces of the glove box
Material: Polypropylene, Delrin or PTFE